How to Use XPEL Rinse-Free Car Wash

What you'll need

// A 5-gallon bucket (preferably with grit guards to prevent debris from mixing back into the water and onto your wash mitt. And wheels for mobility)

// Rinse-Free Car Wash solution

// 4 microfiber waffle drying towels

// A microfiber wash mitt

Step by step

Preparing the Bucket

01 Start with a 5-gallon bucket.

02 Fill the bucket about halfway with water.

Mixing the Rinse-Free Car Wash

03 After filling the bucket halfway with water, add 10 capfuls of the rinse-free car wash solution.

Washing the Car

04 Ensure you have about four microfiber waffle drying towels on hand. They are effective for soaking up water, avoiding streaks, and preventing scratches.

05 Use a microfiber mitt for washing. Dunk it in the solution and halfway squeeze it out to retain a good amount of product.

06 Start washing from the top of the car, allowing the rinse-less wash to flow down and drag dirt from the top of the panel to the bottom.

Drying Process

07 Use the waffle towel to start drying the car.

08 If you see any streaks while drying, don’t worry. Use a new dry towel to remove them, applying light pressure.

09 Flip the towel as needed to avoid leaving streaks.

10 Once a panel is completely dry, move on to the next one.

Cleaning the Wash Mitt

11 Before moving to the next panel, ensure the mitt is free from contamination.

12 Clean the mitt at the bottom of the bucket, scrubbing each side on the grit guard. This process keeps the dirt at the bottom of the bucket, ensuring the mitt is clean for the next panel.

Continuing the Process

13 Continue the same pattern for the entirety of the car.

Products Used